The sparkling shower is a dream for many! In this article, we will know how to steam clean a shower.
You set foot into the shower to get yourself clean. But there is a cold competition running on every family when it’s time to steam clean a shower. Everybody makes peculiar excuses to avoid challenging jobs. Some members think the mom will scold them if any damage is initiated by steam cleaning, and some are busy spending time with the lazy pet or laser tag.
There are many shower options like Fiberglass, Stone, Tile, etc. It would be helpful if you had a different pressure mode for each cleaning. But when you become an expert in steam cleaning your shower, you will find it is one of the simplest ways to remove dirt or stains from a bathroom.
Steam cleaners ensure a deep cleaning process through vapor and pressure to clear every nook of the shower, tiles, wall tiles, and glass doors.
In this guide map, we are here to find an answer to how to steam cleaner a shower with a step-by-step process.
So, let’s dive in!
Preparing Yourself & the Shower for Steam Cleaning
Remove all accessories, bottles, soap cases, and plant holders from the bathroom and choose to clean after someone takes a bath, as the wet surface is helpful. Pick the right steam cleaner first. Under various conditions, the high-pressure steam cleaner and customizable steam control system fulfill your specific cleaning needs. They quickly remove difficult and crusted dirt streaks. A steamer converts water into steam, which you can then use to remove tough stains.
Arrange all necessary and supportive equipment like
- Grout brush or soft bristle brush
- Steam cleaner/ attachments
- Distilled water /Tap water (as per user manual guide)
- Manufacturer’s recommended liquid soap/solvent — Vinegar, Baking soda (for rust or rough stains, it is not mandatory for all cases)
- Sponge/Towel/scrubber (some cleaners have brush attachments)
- Microfibre cloth ( for Stone Shower)
Check the shower and primary specks of dirt. If the shower place is dry, first use a towel to remove any visible dry dust, specks of dirt, or other residues, or check if there is any loose part in the system and fix the unbolt parts with plumbers. Wipe out other spots with a brush or wiper( if the surface is wet). It helps steam cleaners to work smoothly. During pre-treat, you can apply vinegar solution on tough stains for an hour (optional).
Prepare the cleaner
Fill the tank with normal water, distilled water, or liquid solvents per the user’s manual or ask customer care. Fix the proper attachment for shower cleaning if your steam cleaner has one. Always check the temperature according to the application, as cleaners are applied to tiles and glass doors. Regulate it as per instruction to avoid damage. Allow the steam cleaner to heat for 10 – 15 minutes.
Steam Cleaning the Shower
So, let’s follow these steps to know how to steam clean a shower. Fiberglass showers are gaining popularity nowadays, as they are pocket-friendly and can easily be inserted.
Step 1
After a dry wash with a brush, you may have some rust or tough stains. Take the steam cleaner and spray the steam water/soap mixture on shower faucets, doors, and other related hardware. Start to apply the steam pressure on every nook and corner, and you can use a soft-bristled brush to cover a hidden corner of faucets. Avoid applying a steamer for too long in one place to remove tough stains and grime.
Apply the nozzle on the shower head and start a top to bottom wash.
Step 2
You can also apply white vinegar on the showerhead to remove grime. Apply vinegar or baking soda on grime or harsh soap cums for 10 minutes, then rub it with a scrubber or use a microfibre cloth( for a stone shower).
Step 3
You can apply the above-mentioned process on shower tiles, showerheads, and glass doors. Rinse them well to remove any sediment or residue left behind and leave it to dry. The steam cleaner will wipe out excess water.
Finishing up after Steam Cleaning your Shower
You can also use a steam cleaner to clean your bathroom. But let’s know before finishing up, use white vinegar if you find the showerhead has some internal blockage that can’t be washed out by steam cleaner. Submerge the showerhead in a plastic bag full of white vinegar. You can use a rubber band to tie the bag with the shower head and wait for an hour; afterward, rinse it properly.
After washing the whole, release wastewater through the shower drain (sink drain) and check whether the drain is blocked. Remove its cover and position the steam nozzle on the drain; release steam with pressure. But ensure there is no plastic attachment to the drain pipe; otherwise, steam could damage it permanently.
Maintenance
Regular maintenance is necessary to avoid any hair-related blockage or hard water stains. You can use a soft bristle brush, grout brush, wiper, or scrubber for regular maintenance. The shower room needs a proper bath, cleaning, and regular (primary level) wash to maintain the quality after the steam wash.
Conclusion
Mold and soap scum can accumulate on shower tiles and grout, giving your bathroom a dingy and dirty appearance. Mold and mildew can also destroy the shower setup. A little handwork and shower cleaning supplies may give your entire bathroom a new appearance. Your small effort can restore the clean and bright appearance of the shower tiles and grout.
Steam cleaning the shower area helps kill bacteria such as salmonella and listeria and protects you from other contagious diseases. When you use a steam cleaner device on a shower door, you can release the natural adhesives that bind dirt and grime to the hidden corner, allowing you to wipe away soap scum with a soft cloth.
We hope now you are clear with how to steam clean a shower.
FAQ’s
Q: – Can you use a steam cleaner in a tile shower?
Steam cleaners are perfectly okay with grout lines of tiles. You can also use it on unglazed tiles without a second thought. It helps to loosen rough( hard) water stains or dirt from porous areas between tiles.
Steam water or solvent can easily reach every nook and corner easily. If the stain is tough to remove despite steaming, don’t pressurize it, and use a mixture of baking soda and hot water. Apply the paste on stains, leave it for an hour, and use a scrubber to remove them.
Q: – How long time to take washing shower?
The strength of your steam is what it is dependent on, the size of the shower, and tough specks of dirt. It would be best if you started the operation after taking a bath, as it helps to release some dirt. It consumes less time.
However, you can take an average of 30 -45 minutes; it may exceed one hour also. Set your rest of the work as per this schedule.
