How to get Baking Soda out of Carpet: A Detailed Guide

Baking soda is a completely trusted commodity that helps with stain removal and getting rid of stink too. However, the most common query of every first user is how to get Baking Soda out of Vacuum?

Carpets whether they are in your home or office space absorb a lot of dirt and grease as well. Besides, dirty carpets or rugs are a big no-no as they invite a lot of germs and illnesses if not cleaned at regular intervals. In consequence, if you have been thinking of putting baking soda to use to clean the carpet, you can definitely do so. 

In this article, today, we are about to provide a solution to the same.

Also Read:- How to Clean Carpet without Vacuum Cleaner

Step-by-Step Guide to get Baking Soda out of Vacuum?

1. Unplug the vacuum. Safety should always come first when working with electrical appliances.
2. Remove the filter– Refer to your vacuum’s user manual for instructions on how to remove the filter. If your vacuum uses a bag, remove and discard the bag.
3. Empty the dustbin or bag– Dispose of the contents in a trash bin.
4. Brush out the dustbin or bag – Use a clean, dry cloth to remove any remaining baking soda residue.
5. Clean the filter – Rinse the filter with cold water until the water runs clear. Be sure not to use hot water as it may damage the filter. Allow the filter to air dry completely before reinserting it into the vacuum.
6. Clean the vacuum’s brush roll – Remove any visible baking soda with a clean, dry cloth. Use a damp cloth to wipe down the brush roll. Be sure to allow it to air dry completely before reassembling the vacuum.
7. Reassemble the vacuum – Refer to your vacuum’s user manual for instructions on how to reinsert the filter and dustbin or bag.

Prevention Tips to Avoid Baking Soda Buildup in Your Vacuum

Source: bhg.com

If you’re using baking soda in your home, there are a few things you can do to prevent buildup in your vacuum:

1. Use baking soda sparingly – While baking soda is great at eliminating odors, you don’t need to use a lot of it. A light sprinkle is usually sufficient.
2. Vacuum regularly – The more often you vacuum, the less likely it is that baking soda will build up in your vacuum.
3. Use alternatives to baking soda – There are plenty of other odor eliminators you can use in your home, such as vinegar or essential oils.
4. Consider using a vacuum with a HEPA filter – HEPA filters are designed to trap small particles like baking soda and other allergens.

How Long to Leave Baking Soda on Carpet before Vacuum?

Source: tasteofhome.com

It’s recommended to leave baking soda on the carpet for at least 15-20 minutes before vacuuming it up. This will give the baking soda enough time to absorb any odors and moisture from the carpet. However, if you’re dealing with a particularly strong odor, you can leave the baking soda on the carpet for up to 24 hours before vacuuming it up.

How to get use Baking Soda on Carpet Cleaner?

Source: vacuumprince.com

Carpets might enhance the warmth and overall look of your home or office space but if they have greasy stains, they do feel and look otherwise. Consequently, it’s foremost that you get rid of those stubborn grease stains with baking soda. Now, the question is how do you do that effectively?

Well, this stepwise guide will help you get rid of those harsh stains and greasy spots from the carpet effectively:

Step 1: Color-fastness Test

Before you put baking soda on the carpet, make sure it’s tested for color-fastness. High colorfastness is an ideal condition to know about if you are cleaning the carpet with baking soda.

Besides, to perform this test, you can put half a tablespoon of baking soda in a half a cup of water and then mix it. Once mixed properly, spill some of it on your carpet. Now, dry it and inspect your carpet.

Step 2: Pat with a cloth or paper towel 

Blotting is basically a method in which a cloth or paper towel can be used to vaguely blot the carpet. It is advised not to swab it harshly but gently dabbing it does the task perfectly to get rid of excess dirt from the surface.

Step 3: Drizzle baking soda on the carpet

Now, it’s time to drizzle baking soda on the carpet, specifically, on the stained area. Once done, let it sit there as suggested in the above section i.e. depending on how old the stain is and if it needs a longer time to absorb grease or oil. 

Step 4: Vacuuming time

At this point, you have to vacuum the carpet or the specific portion which has stains or grease on it. You can put a good floor cleaning machine to use for this purpose. 

You will be happy to see the stain vanish. If not vanished, it will at least get enough faded. Now, this completely depends on how bad the stain was.

Step 5: Use dish soap on the remained stain

As said earlier, if the stain is somewhat visible and hasn’t vanished completely, you can opt for using dish soap. Apply it on the stain and then use a cloth and blot the area by patting not rubbing.

After that, drizzle some more baking soda on the area and repeat the process of vacuuming. You will see it vanish.

Can we use Baking Soda for carpet cleaning & refreshing?

Yes, you definitely can put baking soda to use when it comes to regular cleaning of carpets. Stains require a long waiting time because you have to keep baking soda sitting for a longer duration on the stained area.

However, it’s not the same as regular refreshing or cleaning, which requires just 15 minutes or so. You can opt for the same steps as listed above i.e.

1. Run the color-fastness Test
2. Drizzle baking soda on the entire carpet. The only condition you must ensure, in this step, is that the carpet should be dry.
3. Allow baking soda 15 minutes at least to sit on the carpet.
4. Now, it’s time to vacuum the carpet thoroughly and you are done.

Want to read more such informational guides? Then, read our blog post on: Libman vs o cedar Spin Mop – What are the differences?

Benefits of Sprinkling Baking Soda on Carpet

Source: thespruce.com

Baking Soda is an effective household cleaning product which offers numerous benefits when you sprinkle it on carpet. We have known how to get baking soda out of carpet, now it’s time to know some benefits of baking soda when you sprinkle it on carpet. 

• Elimination of Bad Smell:- One of the main advantages of sprinkling baking soda on carpet is getting rid of bad and unpleasant odors. No matter if its pet smell, food smell or musty smell, baking soda has that capability of eliminating any of these odors. 
• Removes Non-Greasy Stains:- There is no underlying residue to Non-Greasy Stains. If you want to remove them, baking soda will help in doing that. Sprinkle a little amount of baking soda on the carpet and see the magic. 
• Improved Indoor Air-Quality: – Carpets can impact the indoor air quality if they get accumulated with dirt and dust. In this case, baking soda helps to absorb these particles, reducing the allergens and pollutants in the air. If you sprinkle baking soda on your carpet regularly, it will improve your indoor air quality. 

So, this is the benefit of sprinkling baking soda on the carpet. We hope now you are aware of the resolution for how to get baking soda out of carpet.

Also Read:- Carpet Cleaner vs Upholstery Cleaner: Which One Do You Need?

Conclusion

Keeping your home clean not just makes you feel good but also keeps you away from a plethora of diseases. Do you agree? Carpets and rugs get dirty pretty soon when you roam around with your shoes on or when something falls while eating or so, which is again pretty common.

Baking soda is used in a ton of ways when it comes to cleaning purposes. In consequence, whether it’s cleaning a carpet or floor, it’s advised hugely.

So, we hope that now you know how to get Baking Soda out of Carpet.

If you found this article helpful, then be sure to read our other blog post on:

FAQ’s

Q1: – How long do you leave baking soda on the carpet before vacuuming?

Well, the minimum time required is 15 minutes and it could be as long as 8 hours or overnight. It completely depends on the condition of the carpet’s greasiness or stains, etc.

Q2: – Can you use baking soda to vacuum the carpet?

Yes, it’s one of the most convenient ways because of baking soda’s good absorption power.

Q3: – How long does it take baking soda to absorb moisture in the carpet?

This process can take 15 minutes or even a few hours depending upon the condition of the carpet.

Q4: – Can I leave baking soda on the carpet for 24 hours?

Yes, you can do that as it will help with rigorous carpet cleaning, which is because of the better absorption of dirt/grease and so on.

Q5: – Can I vacuum up baking soda with my Dyson?

Well, this is not suggested at all as it can end up damaging the engine.  

Q6: – How do I make my carpet smell good when I vacuum it?

You can do so by adding a little white vinegar to a bottle with which you can spray it on the carpet. Once done, allow it to dry and that’s it.