Ever thought, “Does backwashing remove water from pool?” Well, you can remove water from the pool. Read this article!
Maintaining a clean and healthy swimming pool is essential for an enjoyable swimming experience. Part of pool maintenance involves cleaning the pool filter, and one common method is through a process called backwashing.
In this article, we will explore backwashing, its purpose, and whether it removes water from the pool.
Also Read:- Can You Use a Wet Dry Vac to Clean Pool
Backwashing: Overview
Source: swimminginsider.com
Backwashing is the process of switching the direction of water flow to remove impurities from a pool filter. You should keep doing that until the waste line is completely clear of water.
We’ve also covered a similar blog post, which you can read in our blog archives:- The Difference Between Dolphin Pool Cleaner vs Polaris .
Significance of Backwashing
Source: thepoolbutler.net
Swimming Pools need constant upkeep, from vacuuming to ensuring optimum water chemistry levels. Backwashing, or turning the water flow around to remove any accumulated impurities, is one technique to keep your swimming pool’s filter system in good operating order.
Water discharge to the pool is reduced as dirt builds up in the swimming pool filter bed due to increased flow resistance. The regular and easy practice of backwashing your pool is crucial for the well-being and efficiency of your filtration.
If you’re interested in reading about more such informational blog topics, read our blog post on: Difference Between Pressure and Suction Pool Cleaner .
Backwashing a Pool Filter: How to Do
Depending on the type of filter you have, different instructions apply; if at all feasible, check the filter manufacturer’s website. Basically, using a DE Filter works like this:
- Turn Off The Pool Pump:- Switch the backwash valve to the backwash position while the pump is off.
- Restart the Pump:- Restart the pump one the filter view-glass appears to be clear. To get rid of more DE, try to alternate between backwash and rinse. Don’t forget to shut off the pump before adjusting the valve.
- Put the DE in the Trash:- Some units have a tank of DE separation, which collects and holds the DE.
- Turn Off the Pump Again:- To prevent the timer or automation system from turning back on while the filter is being disassembled, turn off the pump.
- Drain the Filter:- By releasing the release valve at the top of the filter, you can drain the filter and let the water flow out. Remove the drain plug at the bottom of the filter to allow water to drain from the bottom of the tank completely.
Should You Backwash Frequently?
Depending on how frequently you use your pool and how unclean it becomes from regular use, backwashing and teardown are required.
Normally, DE filters are disassembled and cleaned at least 6 times a year. You should not need to backwash your pool after your planned maintenance unless it gets too nasty.
Can Backwashing Harm The Pool?
Your pool is completely safe and backwashing doesn’t harm your poo at all. However, you should follow the manufacturer’s instructions carefully while backwashing your pool and also make sure that you follow the backwashing guidelines properly.
If you don’t wash your pool improperly, it will lead to water imbalance. If you don’t backwash your pool properly, then it might harm your pool. It is advisable to consult a professional before backwashing your pool.
Conclusion
If backwashing is not a part of your routine for maintaining your pool, it should be! Backwashing makes sure that your filter can work effectively and purifies the water in your pool.
Additionally, by following this process, your filter will last longer and cost you less money. Using this manual, you may realize the many advantages of backwashing.
We hope you get help from this article. This article includes relevant information and doesn’t contain any false details. Just follow the manufacturer’s guide while backwashing your pool.
If you get help from this article, then be sure to read our other blog posts on:-
